Advanced Vibration Analysis - ISO Category III

Students who successfully complete this course will be able to compute statistical alarms, interpret Lissajous Orbits, and apply advanced FFT techniques (i.e. Synchronous Time Averaging, Order Tracking and Demodulation) and time domain analysis on a variety of machine assemblies. This class is intended for maintenance technicians and engineers who want an advanced course in vibration analysis.

Follows Category III Guidelines Established by ISO 18436-2, "Condition monitoring and diagnostics of machine – Requirements for training and certification of personnel – Part 2: Vibration condition monitoring and diagnostics."

Prerequisites
Two years or more training in mechanical technology or mechanical engineering at an accredited college, university or technical school is strongly recommended. Candidates should be able to manipulate simple algebraic equations, use a basic scientific calculator, and be familiar with the operation of personal computers.

ISO Certification
Requires a total of 110 hours of formal training or independent study, Category II Certification, 36 months experience, and examination.

Course Length
Minimum 40 Hours.

Certification Exam
100 questions, 4 hours time limit, closed book but a summary sheet of formulae is provided, passing score is 75% correct.

Course Objectives
Students who successfully complete this course will be able to:

Select the appropriate machinery vibration analysis technique
Specify the appropriate vibration instrumentation hardware and software for both portable and permanently installed systems
Establish vibration monitoring programs, including the determination of machines for periodic and continuous monitoring, frequency of testing, route plans
Perform single plane field balancing
Measure and perform diagnosis of single-channel frequency spectra, as well as time domain plots such as waveforms and orbits, under both steady-state and unsteady operating conditions, with or without a phase trigger
Use acceleration enveloping (demodulation)
Establish and implement the use of statistical overall level alarms, spectral band alarms, and narrowband spectral alarms
Establish programs for the specification of vibration levels and acceptance criteria for new machinery
Measure and analyze basic operating deflection shapes
Report to management regarding program objectives, budgets, cost justification and personnel development
Understand and be able to direct the use of alternative condition monitoring techniques
Prepare reports for appropriate personnel on machine condition, recommend corrective action and report on the effectiveness of repairs
Recommend field corrective actions such as balancing, alignment and parts replacement
Provide instructions and technical direction to vibration trainees

CLASS REGISTRATION

Category III - Advanced Applied Vibration Analysis

Cost: $1,650

Please fill out the following form (all fields required) and submit payment to register for this class. Feel free to contact us with any questions or comments you may have at info@pioneer-engineering.com or 970-266-9055. Thank you!

First Name:	(required)
Last Name:	(required)
Company:
Title:
E-mail:	(required)
Class Date:
Phone:	(required)
Mobile:
Fax:
Address:	(required)

City / State / Zip:	(required)


Submit Information and you will be directed to a Paypal payment page where you will select your class date and complete the registration process.
Note: Pioneer Engineering will not share your contact information with anyone else.

If you wish to register by fax or email, to be billed, pay by check or credit card, please download this Class Registration Form. Please fax completed form to (970) 282.6999, Attn: John Grencik or send by email to jgrencik@pioneer-engineering.com

Pioneer Engineering • 912 Smithfield Dr., Unit 4, Ft. Collins, CO 80524 • Phone: 970-266-9005 • Fax: 970-282-6999

Home • Contact • Services • News • Company • Resources • Education • Reliability • Engineering • Site Map